710 Labs Knowledge Base: Frequently Asked Questions

Extraction Mechanics & Product Definitions

1. What is the fundamental difference between 710 Labs Live Rosin and Persy Rosin?

The core distinction lies in the separation of the trichome heads during the ice water wash phase. Standard Live Rosin utilizes a broader micron spectrum (typically capturing the 40u to 159u range) from the first and second pressings of fresh-frozen material.

Persy Rosin—short for “Personal Stash”—is crafted exclusively from the finest, isolated 90u micron spectrum of the very first wash. This specific size represents the absolute peak of trichome maturity and structural integrity, yielding a cleaner melt, fewer residual lipids, and a highly concentrated terpene profile.

2. What does “Full Melt Water Hash” mean, and how should it be consumed?

Full Melt Water Hash (often labeled as six-star hash) consists of unpressed, isolated trichome resin glands extracted purely via ice, water, and physical agitation. Unlike rosin, it undergoes no heat application during processing. It is termed “full melt” because it vaporizes completely on a clean surface without leaving charred plant residue or carbon buildup. To prevent premature nucleation (greasing), it must be kept frozen until immediately prior to use and is best consumed using a specialized quartz nail or vaporizing surface at low temperatures (480°F to 520°F).

3. How does 710 Labs produce Persy Sauce without using chemical solvents?

Persy Sauce is a solventless mechanical isolation. By applying controlled, low-tier heat and pressure over an extended period to premium pale hash, the formulation naturally separates into two distinct phases: solid THCa crystalline structures and a dense, viscous liquid terpene fraction. The two parts are then recombined into a stable, wet, crystalline consistency that does not require cold storage to prevent immediate drying out.

4. What are the tier rankings (Tier 1 to Tier 4) based on?

Rather than sorting products by arbitrary potency percentages, the 710 Labs grading metric relies heavily on three specific variables:

  • Flavor Profile & Terpene Expressiveness: The complexity, distinctiveness, and strength of the aroma and taste upon vaporization.

  • Cultivar Yield and Rarity: Low-yielding, exotic strains that are difficult to cultivate (such as authentic Z or Lemon Tart Pucker) naturally command a higher classification due to limited batch sizing.

  • Visual and Meltdown Purity: The absence of any post-vaporization residue.

Tier 1 indicates the absolute pinnacle of that specific harvest cycle, while Tier 4 represents highly clean, standard everyday runs that still meet strict organic compliance rules.

5. What is the difference between Live Rosin and Live Resin in the 710 Labs lineup?

The difference is defined by the method of chemical isolation:

  • Live Rosin (Solventless): Extracted purely with ice, water, heat, and physical pressure. No chemical solvents ever touch the plant material.

  • Live Resin (Solvent-Based): Processed utilizing a high-purity, closed-loop hydrocarbon system (butane/propane blend) to strip cannabinoids and terpenes from fresh-frozen flower. This yields dense hydrocarbon badders, sugars, and sauces that highlight specific molecular fractions of the plant.

Storage, Hardware, & Optimization

6. Why does my live rosin look dry or chalky, and how can I prevent it?

When live rosin is exposed to ambient air or fluctuating temperatures, it undergoes a chemical process known as nucleation (commonly referred to as “buddering out”). The volatile terpenes separate from the cannabinoid matrix, causing the texture to change from a translucent, glassy oil to a dry, opaque wax. To prevent this, always store your jars in a sealed container inside a freezer.

7. What is the proper protocol for bringing concentrates out of cold storage?

+-----------------------------------------------------------------------------+
|                     COLD-CHAIN DECOMPRESSION PROTOCOL                      |
+-----------------------------------------------------------------------------+
| [Step 1: Pull from Freezer] -> Keep the jar completely sealed.              |
| [Step 2: Ambient Acclimation] -> Wait 15 to 30 minutes on the counter.      |
| [Step 3: Break the Seal] -> Open only after the glass reaches room temp.     |
+-----------------------------------------------------------------------------+
| Critical Warning: Opening a frozen jar causes moisture from the room to     |
| condense directly onto the cold oil, leading to popping and sizzling on     |
| your heating element.                                                       |
+-----------------------------------------------------------------------------+

8. Why does the 710 Labs Vape Pod require proprietary hardware?

Our vape pods do not utilize generic 510-threaded hardware. They are engineered around a proprietary, low-voltage battery system specifically calibrated to vaporize thick, solventless oils. Standard 510 batteries generally run at voltages that are far too high, which instantly burns the delicate, low-boiling-point terpenes inherent to live rosin, ruining the flavor profile.

9. My vape pod is clogging or tastes burnt. How do I fix it?

Avoid consecutive, long-duration draws (“blinkers”), which overheat the internal ceramic core. If a clog occurs, remove the pod from the battery and draw gently through the mouthpiece to clear the airway. Always store the pod vertically to keep the oil settled uniformly over the intake holes, and keep the gold electrical contact pins free of debris by cleaning them with a dry cotton swab.

10. What is 710 Labs RSO, and how should it be administered?

Rick Simpson Oil (RSO) is a highly concentrated, full-spectrum extract produced via sub-zero alcohol wash. Unlike many brands that strip out the secondary plant components to make a clear oil, 710 Labs preserves the complete array of cannabinoids, lipids, and flavonoids from specific, individual cultivars. It is designed strictly for oral or topical consumption—never vaporize or dab RSO, as the presence of natural plant lipids can irritate lung tissue.

Related Product Lines & Structural Ecosystems

The “Close Friends” Program

The Close Friends collection represents the highest echelon of the 710 Labs ecosystem. Dropping in highly limited, numbered 2-gram jars every few months, these small-batch offerings feature rare genetic combinations and custom packaging art.

The category frequently showcases Persy Thumbprints—a specialized visual arrangement where a core of rich, liquid Persy Sauce is nestled inside a outer ring of cold-cured Persy Live Rosin Badder, giving consumers two distinct textures and terpene expressions within a single jar.

                  +-----------------------------------+
                  |      PERSY THUMBPRINT ANATOMY     |
                  +-----------------------------------+
                  |  ===============================  |
                  |  || [ Cold-Cured Rosin Badder ]||  |
                  |  ||      +-------------------+  ||  |
                  |  ||      |   Persy Sauce     |  ||  |
                  |  ||      |  (THCa + Terps)   |  ||  |
                  |  ||      +-------------------+  ||  |
                  |  ===============================  |
                  +-----------------------------------+

Living Soil Flower & Infused Joints

Beyond extraction, our facility prioritizes full-plant cultivation utilizing Living Soil methodologies. By avoiding synthetic fertilizers and relying on complex, microbially active soil systems, the flower develops robust, deep terpene profiles that mirror historical landrace and legacy strains. This hand-trimmed flower is packaged in nitrogen-flushed jars or prepared into Infused Pre-Rolls, which blend top-tier ground flower uniformly with solventless bubble hash for a slow, clean burn.